Consulting Hotline0755-2728-6106
phones number13312911695
Consulting Hotline0755-2728-6106
phones number13312911695
Your present position：Home > Product > Glue stiring machine
Glue stiring machineCategory：Glue stiring machine
Hotline:0755-2728-6106
| Application: Glue ratio with packing
| Principle of operation：
1, glue quantity is set to digital input
2, now with the current use, on-demand amount
3, glue set, the density of different glue can be set by the coefficient.
| Parameters:
|
1 |
Proportion with glue |
Fixed proportion between 5: 1~3:1 is allowed |
|
2 |
Mixing method |
Dynamic mixing |
| 3 |
Counter tops |
DIY |
|
4 |
Programming mode |
Digital programming |
|
5 |
Dimensions |
850*700*1400MM |
|
6 |
The main pump (A pump) |
Screw pump: wear-resistant, suitable for additives glue (China-German joint venture) |
|
7 |
Attached pump (B pump) |
Gear pump: (Taiwan) |
|
8 |
Tank Capacity |
AB Cylinder 25L with stirring and heating, B20L |
|
9 |
A plastic flow |
2-10g/s |
|
10 |
A plastic head |
Single |
|
11 |
Input pressure |
0.5-0.7Mpa |
|
12 |
Machine power |
1000W |
|
13 |
Supply voltage |
AC220V±10%,50-60HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + 7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently，a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Operate motor |
YAKO Original motor |
|
4 |
Metering pump body |
Taiwan precision adjustment wear type |
|
5 |
Cutting system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
| 7 | Thermostat |
Silicone heaters |
|
8 |
Stirring motor |
Taiwan OUTAI |
|
9 |
Frame material |
A3*3mm manufacture |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system
|
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detEction feedback function |
The drum part is equipped with low level alarm function, timely remind the glue to add
|
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
| 5 |
High precision mechanical pump body |
Precision adjustment wear type |
|
6 |
Automatic mechanical agitation |
The use of imported high-quality safety factor reliable silicone film fever, super protection; Rubber bucket heating effectively solve the glue in the low temperature flow is not good |
|
7 |
Glue bucket heating |
The use of imported high-quality safety factor reliable silicone film fever, super protection |
| Characteristics of gluing part:
A. Adjust the ratio of adjustment, plastic volume adjustable. Ready to use at any time, on-demand ratio, save glue.
B. Simple and convenient operation, simple editing procedures, no cleaning, easy disassembly, A B directly into the two glue into the two corresponding barrels, when filling with plastic, the workers only need to press the start switch can be.
C. According to the performance of the glue, A rubber bucket with a thermostat device. B rubber bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
D. Just clean the mixing tube.
Consulting Hotline0755-2728-6106
phones number13312911695
Scan, focus on us
